27
1812411-11
Select the particulars that you have keyed in earlier from the list by scrolling the highlighted bar up or down
when pressing
or
key. If the particular is not in the list that you are looking at, you may go to the next
page by pressing
or
key. Once you have found it, press key to confirm. The display will show the
results stored from its memory as example shown below:
Printout of Stored Test Results
Important:
The Analyzer has to be connected to a 12V battery in order to work with its printer. This is because the printer
needs higher Amps to operate which the PC USB output is unable to provide.
Printing of the stored Test Results can be done while in View Test Results from Stored Memory (Fig.81
–86). To
print just press key on the Analyzer, the printer will start printing.
An example of the printout as shown in Fig.87 below:
Note: To print out on a normal computer printer, it must be connected to the PC with the Analyzer software
installed. (See Printing Results from PC Printer
– Page 32).
To exit the program, pressing the key at any moment will exit and return to the main menu screen (Fig.79).
Fig.87
Fig.85
Fig.86
Fig.81
Fig.84
Fig.83
Fig.82
Date and time when testing was done
Marked with
**
indicates bad
readings
Particulars that were keyed in
Battery results
Company name and address
12.65 V
[560 CCA]
480 CCA
8.65m
79%
10.36V
14.3V
15.6
V
14.0V
13.9V
14.0V
13.8V
0.08V
20.58 m