![background image](http://html.mh-extra.com/html/matco-tools/mbt2415/mbt2415_instruction-manual_1739671011.webp)
11
1812411-11
9. If the rating is selected under JIS # (Japanese Industrial Standard), then you need to refer to the conversion
chart provided separately with the Tester when purchased to convert to CCA ratings.
Refer to the battery model (example: 80D26L or NX110-5L) on the Cold Cranking Amps (CCA), WET is 580
CCA and AGM is 630 CCA.
10.
You can also use the rough CCA guide below, based on the engine capacity of vehicle, but the percentage (%)
life is not that precise as compared to the actual battery rating due to this rough estimation.
11.
To enter the value, press
or
key to increase or decrease the original value shown on the display by 100
units. Likewise use
or
key to increase or decrease the last two digits by 5 units for each press. See (Fig.25)
below:
12. Once the Amps rating of the battery is confirmed, press key to start the testing process. Refer to the display
below (Fig.26):
13. In less than 8 seconds, the results of the testing will be displayed on the LCD screen (Fig.27) if the battery
condition is very good (e.g. having more than 75% life).
1000
– 1299 cc
300 CCA
1300
– 1599 cc
400 CCA
1600
– 1999 cc
500 CCA
2000
– 2999 cc
700 CCA
3000
– 3500 cc
800 CCA
Fig.27
8
Fig.25
8
Fig.26
8
Battery Result
State of Charge (SOC)
Rated CCA
Measured CCA (Power Available)
Internal Resistance
Life [Health]
12.65 V
[560 CCA]
480 CCA
8.65 m
79 %
500
CCA