HFMT3L
www.matcotools.com
2010179-33
Warning
• SaniDate
®
All Purpose Disinfectant is effective in the treatment of bacteria and viruses
only by following the below strict treatment instructions
• Mix Ratio: 1 fl. oz. (30ml) SaniDate
®
All Purpose Disinfectant to 2.1 pt. (1L) of water
• Ensure mixture is fully diluted prior to commencement of treatment
• Sanitizing Gun operating air pressure: 80psi
• Operate Sanitizing Gun into interior of vehicle until all air space is fully misted
• Ensure that all surfaces of treatment area are evenly coated
• Required contact time for effective treatment: 10 minutes
• Only SaniDate
®
All Purpose Disinfectant is approved for use with the High Flow
Misting Gun
1. Mixture Preparation
1.1 Using suitable measurement
vessel, measure out the
required amount of SaniDate
®
All Purpose Disinfectant for
required mixture volume.
Mixing Ratios
Mixing Volume
Water
SaniDate
®
Volume
Pints
L
fl. oz.
ml
2.1
1
1
30
4.2
2
2
60
6.3
3
3
90
Treatment