English
Printed in China
P
AINT
C
REW
®
H
IGH
P
ERFORMANCE
A
IRLESS
S
PRAYER
T
ABLE OF
C
ONTENTS
:
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
BEFORE YOU BEGIN SPRAYING . . . . . . . . . . . . . . . . . . . . 5
PURGING AND PRIMING. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
SPRAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SPRAYING TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 8
CLEANUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10
INLET/OUTLET VALVES. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38
SERVICE CENTER LIST . . . . . . . . . . . . . . . . . . . . . . . . 39-43
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
O
WNER
’
S MANUAL
•
R
EAD THIS MANUAL FOR COMPLETE INSTRUCTIONS
0503
• Form No. 0515801D
S
PECIFICATIONS
:
Weight .............................. 25 lbs.
Capacity ........................... 2 gallon hopper
Power source ...................3/8 Hp universal motor
Power requirement ...........15 amp minimum circuit on 120 VAC,
60 Hz current
Generator .........................8000 W
Spraying pressure ............2800 PSI
Safety features .................Spray gun trigger lock and guard;
built-in tip safety guard; priming
knob for safe pressure release.
Conforms to UL STD 1450.
Certified to CAN/CSA C 22.2
NO 68-92.
Capability..........................Sprays a variety of paints, oil
base, latex, primers, stains,
preservatives and other
nonabrasive materials.
Do not use materials with flash
points below 70°F (21°C).
1-800-328-8251
Wagner Technical Service
Need help?
Call us first for answers fast.
Call Wagner Spray Tech toll-free if you have any
comments or problems with this product.
1770 Fernbrook Lane, Minneapolis, MN 55447
http://www.wagnerspraytech.com
Visit us on the world wide web!
This pump should not be used with textured materials,
block filler, lacquers, industrial enamels, or asphalt
sealer or materials containing HHC. See coating
supplier if flash point is not listed on the container.
