Matan JetSet 3.2P Printer
63
User Manual
Chapter 6
Appendix
6.1
Error and Warning Codes of Control
Software
Code Comment
-1 Be
printing!
-2
Rip file can't be read!
-3
The Liquid-Protected switch isn’t normal
-5
Motor or Linear-Encoder isn't work!
-6
The phase of Linear-Encoder is reverse!
-19
Any image file can't be found!
-21 Footnote
Error!
-31
Edge error: Edge sensor maybe damaged if not found materials!
-32
Only right edge is found!
-100
The value of one or more offset parameters is minus!
-101
The print position is out of border!
-102
The image width is larger than the maximum width of printer!
-103
Material width is too small!
-104
Material width is smaller than the left border value of material!
-105
Print speed is invalid!
-106
Margin value is minus!
-107
Group of print head is invalid!
-108
The emergency switch is pressed down!
-109 Invalid
mode!
-110
The left value of selected area is out of border when Region printing!
-111
The width of selected area is out of border when Region printing!
-201
Print parameter is invalid!
