Matan JetSet 3.2P Printer
57
User Manual
Chapter 5
Maintenance
5.1
Maintenance Specifications
Proper maintenance is crucial to the operation of the machine.
These maintenance specifications illustrate maintenance at different levels of detail. We
suggest copying the specifications and pasting them on the printer or somewhere near it to
enable them to be seen clearly by all operating personnel.
5.1.1
Preparations before Start
1. Check the printer input power.
2. Clean the print head, clean roller, and printing platform. Remove anything
superfluous from the surface of the platform.
3. Check the liquid level of the first ink tank.
4. Switch on the general power supply, turn on the computer power, then the servo
motor and then the heating.
5. Turn on emergency stop switches at both ends of the machine.
6. Check whether moving parts work normally, moving without blockage. After software
starts, operate and check X-Axis, Y-Axis, cleaner, limited SWs, and emergency
stops.
7. Tension value should be 55V; maximum is 70V.
8. Turn on the HV voltage SW, select the menu print/flash jet.
9. Check room temperature (20
0
C to 29
0
C) and humidity (40-80%).
5.1.2
Maintenance in Printing
1. Before printing, clean the print heads to enable smooth jetting. Clean print heads
after finishing each job. (See cleaning method for print heads).
2. Check around the machine during normal printing:
a. There should be no irrelevant articles on the platform of the machine.
b. Touch the heating board with your hand to ensure heating temperature is
normal. (Note: when moving the print carriage do
not
touch the pre-heating
board with your hands).
c. Listen while the machine is printing. If you hear any strange sound, stop the
machine and find out the reason.
