Matan JetSet 3.2P Printer
61
User Manual
2. After ink is completely discharged from each secondary tank, use syringe to inject
solvent into tank from air hole on top of the tank, inject one syringe of solvent to
every ink tank.
3. Place two or three cleaning paper with some solvent clouding, then use PE film and
cover the print head.
4. Automatic cleaning function of print head:
a. Do not use unauthorized cleaning wiper to clean the surface of print heads.
b. To clean with the function of machine’s own software.
c. You can choose automatic cleaning, or half-automatic cleaning and opening
suction function, then move carriage left and right, clean the print heads one
by one.
d. In printing process, set one cleaning after several automatic go and back
working, generally we suggest to clean dark image once within 10 times and
30 times at the most for tint colors.
Keep the surface of the print heads humid with ink or solvent. The surface of a print
head set must be protected by cellophane paper, film, or polythene packing material
to prevent dryness. To prevent damage to the print heads as much as possible you
must:
1. Only use authorized printing ink, solvent, and cleaning wiper.
2. Clean and package the print heads whenever printer idle time exceeds half an hour.
5.3
Ink Supply System Maintenance
5.3.1
Cleaning the Ink Supply System
♦
Discharge ink from the ink tank and fill it with solvent.
♦
Make printing ink flow out naturally without closing the power supply of the ink supply
system until the ink discharged is mainly solvent.
♦
Turn on liquid protection in software.
5.3.2
Adding Ink
♦
Before the first adding of ink, use solvent to clean the ink tank.
♦
Keep the power supply of the ink supply system on, the same as when cleaning the
ink supply system.
♦
Before connecting print head tubes, release some solvent at each outlet to ensure
no residue is left in the tubes.
