8
CE Regulation use and maintenance manual
IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
3.
HANDLING, ASSEMBLY AND INSTALLATION INFORMATION
3.1. HANDLING, STORAGE AND PACKAGING
The standard MasterWeld packaging does not guarantee protection against rain. The
machine must be stored in an enclosed environment with a relative humidity below 70%.
The machine must be stored in temperatures between -10°C and +50°C inclusive.
When handling materials, use suitable lifting devices and adopt all of the safety precautions
required for the work site activities, also consult the technical data for the packaging described
in the Packing List.
On pallet
PACKAGING DIMENSIONS (a) x (b) x (h)
[mm]
WEIGHT [Kg]
EXTRACTION FAN
See the packing list accompanying the
shipment
See section "
3.2. Directions for
machine assembl
y"
Provide a delimited and adequate area, with level floor or surface, for unloading and depositing packs.
It is always advisable to keep the packs horizontal during handling in order to avoid losing stability and/or them
overturning.
For lifting, please refer to the paragraph "3.3. MOVING THE MACHINE".
3.2. DIRECTIONS FOR MACHINE ASSEMBLY
Before assembly, visually inspect the material to make sure it was not damaged during
transportation. If there are signs of damage, inform the seller within 10 days from delivery.
Before proceeding with assembly, read paragraph "3.4. MACHINE INSTALLATION MODE".
For transport reasons and/or due to particular agreements stipulated between the customer
and the supplier, the parts required to assemble the machine may be different than those
described in the assembly phases.
Prior to opening the packaging, tilt the cage to prevent the material from overturning. Do not
exceed the maximum angle indicated in the figure.
