22
IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
LIGHT KIT ASSEMBLY
LIGHT KIT ASSEMBLY
ACTION
IMAGE
W
IN
G
H
O
O
D
With plastic hood
WING HOOD Ø150
1)
Disassemble the hood according
to the procedure described in the
paragraph, in the reverse order
"3.2 DIRECTIONS FOR MACHINE
ASSEMBLY"
2) Insert the light kit inside the hood
handle, drill 2 holes and fix with the
screws
3) Pass the power cord along the
structure of the arm, fix it to the tubular
structure with the bands, and introduce
it in the hood (through the hole),
using the feed through strip provided,
after removing the protection hood
.
4) Connect the power cord installed at
point 3) with the kit connector
A
L
U
M
IN
IU
M
/
IN
O
X
1)
Assemble the support structure
of the light kit as described in the
previous table, following points from
1 to 4
2) Pass the power cord along the
structure of the arm, fix it to the tubular
structure with the bands, and introduce it
in the cap (through the hole),
using the feed through strip provided,
after removing the protection cap.
3) Connect the power cord installed
at point 2) with the kit connector
