23
CE Regulation use and maintenance manual
IT IS FORBIDDEN TO EVEN PARTIALLY REPRODUCE THE TEXT AND/OR ILLUSTRATIONS.
www.masterweld.co.uk
3.7. CUSTOMISED CALIBRATION
The mobile parts of the arm do not need to be calibrated before use but some standard calibrations may be
performed directly by the user to customise the device.
3.7.1. Hood calibration
Adjust the brake pressure delicately as shown below.
+
+
3.7.2. Joint calibration
JOINT 1 CALIBRATION
JOINT 1 CALIBRATION
ACTION
IMAGE
Position the arm as shown in figure
and remove the spring cover on the
upper part of joint 1 using a flat tip
screwdriver as shown in figure.
