INSTALLATION OF THE INTERFACE
4
December 2008 / USB Interface for Solar ChargeMaster / EN
2 INSTALLATION OF THE INTERFACE
2.1 CONNECTIONS
What you need:
;
USB Interface for Solar ChargeMaster
with
connection cables (included)
A PC or notebook with Internet connection and a
free USB 2.0 port (not included)
See figure 2
-
1
•
Insert the white connector into the data port (left
port) of the Solar ChargeMaster.
•
Connect the USB connection cable to the USB-
port of the PC or notebook.
Fig 2-2: Solar ChargeMaster Dataport
2.2 SOLAR
CHARGEMASTER
COMMUNICATION SETUP
Program the Solar ChargeMaster using next steps.
1. Push and hold the button on the Solar
ChargeMaster until you see figure 2.3a.
2. Push the button 7 times until you see figure 2.3b.
Figure 2-3 a,b
3. If you see this figure push and hold the button
until you see figure 4a, 4b or 4c.
Figure 2-4 a,b,c
4. Push and hold the button until you see the display
flashing.
5. Push the button repeatedly until you see figure
2
-
4c. Now push and hold the button to save the
setting.
Push the button twice to see figure 2
-
5a.
Figure 2-5 a,b
6. Push the button once more to return to figure 5b.
You now have entered the Solar ChargeMaster
programming menu and the Solar ChargeMaster is
ready for communication with the
USB Interface for
Solar ChargeMaster.
Please note that the data port pins are
in the under part of the connector. Hold
the white plug with the side up like
shown (1) and push it gently into the
data port (2).
Connect the other cable with any USB
Port on your computer.
2
1
USB interface for Solar ChargeMaster
USB connection cable
PC or
notebook
Solar ChargeMaster
Figure 2-1: Connection of USB Interface for Solar ChargeMaster
