TROUBLE SHOOTING/ SPECIFICATIONS/ ADDITIONAL INFORMATION
EN / USB Interface for Solar ChargeMaster / December 2008
19
8 TROUBLE SHOOTING DATA CONTROL
Contact your local Mastervolt Service Centre if you
cannot correct a problem with the aid of the
malfunction table below. See www.mastervolt.com
for an extended list of Mastervolt Service Centres.
Failure
Possible cause
What to do
The Solar ChargeMaster was not
configured for communication with the
USB Interface.
Configure the Solar ChargeMaster,
see section 2.2.
The com port was not assigned
Choose the comport, see section 5.2.
The driver was not installed
successfully.
Follow the directions in the driver
trouble shooting, see section 3.8.
At the function “Read from
charge controller”, the
message “There is no Solar
ChargeMaster interface on the
adjusted comport” appears.
The connections are not right.
Check the wiring.
9 SPECIFICATIONS
Model:
USB Interface for Solar ChargeMaster
Article number:
21730400
Delivery includes:
USB Interface for Solar ChargeMaster including cables, user’s manual
Function of instrument:
Communication between your PC and the Solar ChargeMaster
Manufacturer:
Mastervolt Amsterdam the Netherlands
Weight
Approx. 170 g, including attached cables
Protection degree:
IP 21
Dimensions:
74 x 44 x 24 mm (2.9 x 1.7 x 0.9 inch)
10 ADDITIONAL INFORMATION
ORDERING INFORMATION
Part number
Description
21730400
USB Interface for Solar ChargeMaster
131802000
Solar ChargeMaster SCM-N 20
131804000
Solar ChargeMaster SCM-N 40
Mastervolt can offer a wide range of products for your electrical installation, including an extended program of
components for your MasterBus network or MasterVision switchboard.
See our website www.mastervolt.com for a complete overview of all our products.
