21
ASSEMBLING THE ROTARY TOOL
STAND
The rotary tool stand is used to hold the
rotary tool while using the flexible shaft.
1. Insert the bottom end of the tool holder
(1) into the matching slots (2) in the base
of the stand (3) (Fig. 5).
NOTE:
Rotate the tool holder in order to
position the tool clamp (4) toward the front
of the base.
2. Rotate the tool holder 90
°
clockwise in
order to secure it to the base.
3. Install the flexible shaft on the rotary tool
(Fig. 3).
4. Pull out on the tool holder clamp lever
(5) in order to open the tool holder clamp
(4) (Fig. 6).
5. Insert the flexible shaft (7) through the
tool holder clamp, and insert the rotary tool
(6) into its clamp (4).
NOTE:
Verify that the rotary tool is
inserted fully into the clamp.
6. Push the tool holder clamp lever toward
the tool until it snaps into place and holds
the tool securely in place.
7. If the tool is left installed in the stand
with the flexible shaft installed, hang the
collet end of the flexible shaft
in the slotted holder (8) that is located at
the right side of the stand.
8. Accessories can be stored in the base
of the stand, in the spaces that are
provided (9).
ASSEMBLY AND OPERATING INSTRUCTIONS
Fig. 5
Fig. 6
Summary of Contents for 54-4790-6
Page 13: ...13 CONTENTS 0 A D B C E F G H I J K L M...
Page 37: ...37 EXPLODED VIEW...
