31
CUTTING WOOD
WARNING:
Wear safety goggles,
hearing protection, and a dust mask when
performing sawing operations. Failure to
use adequate protection could result in
serious injury.
WARNING:
Do not place hands
near or below the cutting line.
The mini circular saw attachment is
designed to make smooth cuts in
extremely thin pieces of wood. Verify that
the saw blade is not in contact with
anything, and that the operator's hands are
clear of the blade before turning the rotary
tool on.
1. Turn rotary tool on.
2. Set the speed to 25,000 RPM.
3. Position the saw attachment on the
edge of the workpiece, with the blade
aligned with the cutting line.
4. Slowly move the blade toward the
cutting line until it comes into contact with
the workpiece.
5. Once the blade begins to cut, move the
blade into the workpiece at a slow and
steady pace, following the cutting line.
NOTE:
The mini circular saw attachment is
designed to cut straight lines only. It is not
designed to cut curves.
Moving the saw at a slow and steady pace
will produce a smooth cut. Forcing the
blade to cut too quickly will cause it to
overheat, which will result in burn marks
on the wood, a rough cut, and a dull blade.
!
!
ASSEMBLY AND OPERATING INSTRUCTIONS
Summary of Contents for 54-4790-6
Page 13: ...13 CONTENTS 0 A D B C E F G H I J K L M...
Page 37: ...37 EXPLODED VIEW...
