Masterclock CLKTCD12, User Manual

Page: 18 / 39

CLKTCD12 User Manual 15
© Masterclock
®
, Inc 2006-2007.
Rev 1.2.0 May ‘07 http://www.masterclock.com
7. Verify the final hand positions.
Set to 12:00:00 : Set to 6:00:00
All hands hour, minute, & second Hour hand points to center of 6
point to center of 12 tic mark mark; minute & second hands
point to center of 12 tic mark
8. Change SW2-8 to “Run” mode (OFF).
The new hand alignment settings will be stored in non-volatile flash. The clock hands
will adjust to the new settings and will continue displaying the time after several
moments.
[Note: it is suggested to double check the new settings with the digital display reference
at this point to ensure that the hands have been correctly set]