CLKTCD12 User Manual
17
© Masterclock
®
, Inc 2006-2007.
Rev 1.2.0 May ‘07
http://www.masterclock.com
Main Window
Each clock can be configured to display local time, using time zone offsets and DST
settings. These offset changes are made relative to UTC time. The clock always
interprets the incoming time code as UTC.
The top left section of the main window shows the firmware version and serial
number of the clock. Located below this information is the current status of the
clock display, this information is constantly updated. The
Local Time
is the time
displayed on the clock face, including any time zone, or DST offset information.
The
UTC Time
is the internal time reference derived from the incoming time code
and treated as UTC. This display update is not precise, but is meant to give you a
view of the clock display time for basic troubleshooting and maintenance purposes.
Also included is a
Time Code Status
which displays the type of incoming time code
&/or the synchronization status.
The
Time Zone
and
Daylight Saving Time
buttons, included in the right half of the
window, give the clock complete flexibility to set and display any time zone and
worldwide DST combination.
Time Zone Offset
Modify the time zone by first clicking the
Time Zone
button. This opens a new
window that gives you a list of time zones, including descriptions to help with the
selection. Select the desired time zone and click
OK
to close the window. Changes
are applied when you click
OK
.
Summary of Contents for CLKTCD12
Page 26: ...CLKTCD12 User Manual 23 Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Page 37: ...CLKTCD12 User Manual b Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Page 38: ...CLKTCD12 User Manual c Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
Page 39: ...CLKTCD12 User Manual d Masterclock Inc 2006 2007 Rev 1 2 0 May 07 http www masterclock com...
