Entrée Bath Gen III
OPERATION MANUAL
01-27-2022
Page 9 of 18
450 East 32
nd
Street PO Box 1022 (68026)
Fremont NE 68025
800-798-5867 Office: 402-564-5867 FAX: 402-563-9102
www.mastercarebath.com
1.
Weigh The Individual:
If you have a scale on your Transfer Chair, now is the
time to take and record the weight of the individual.
Key steps to Get Accurate and Consistent Weights:
a.
Before you transfer the resident on to the chair
push ZERO button below the scale display window
to zero out the weight of the chair.
b.
The seat must not be touching the tub or anything
else, the front casters must be in the locked
position, all four casters must be on a consistent
level floor surface.
c.
Transfer the resident onto the chair and position
them in a stable position. If the resident is
unstable or is moving around, wait until they settle
down and secure them with the SECURITY BELT.
d.
The resident's weight will appear in the display
automatically. Make sure no one is touching or
leaning on the chair including yourself during the
weighting procedure.
e.
Record the weight.
Note
: If you accomplish the above steps every time
you weigh someone, you will help assure getting an
accurate weight.
SCALE CONTROL PAD OPERATIONS:
ON/ZERO Button:
Press before seating
person to be weighted to turn scale on and
zero out weight of previous person.
Important: Immediately after pressing the
ON/ZERO Button
you will see a sequence
of three sets of numbers. The first two sets
are service information, and the last set is
the battery life indicator. If the last set of
numbers reads below 5.2 call maintenance
to replace the batteries.
LB/KG Button:
Press this button to switch
from lbs. to kg as needed before seating
the next person to be weighted.
RECALL Button:
Press this button if you
need to know the weight of the last person
weighted after they have left the chair and
the scale has not been turned on and
zeroed out for the next person to be
weighted.
