Entrée Bath Gen III
OPERATION MANUAL
01-27-2022
Page 3 of 18
450 East 32
nd
Street PO Box 1022 (68026)
Fremont NE 68025
800-798-5867 Office: 402-564-5867 FAX: 402-563-9102
www.mastercarebath.com
FEATURES AND OPERATING CONTROLS
Mixing Valve:
Adjusts the temperature of
the mixer water to the shower Spray and tub
fill spigot. Turn counterclockwise for hotter
and clockwise for colder mixed water
(accuracy must be checked periodically per
facility protocol).
Tub Fill and Shower Spray Control Valves:
Turns ON/OFF and controls the flow of
mixed water to the tub fill spigot and shower
Spray.
Digital Thermometers:
Digital readout
temperature of the mixed water to the
shower Spray and console (Preset at factory:
Field
calibration
maintenance,
see
maintenance manual).
Emergency Door Open Button
and the Door
Open Button
at the same time
to open the
door
.
It will override the drain water sensors.
Door Open/Close Button:
To open door,
press and hold down the Door Open Button
until the door comes to a complete stop. To
close the door, press and hold down the
transmitter close button until the door
comes to a complete stop.
CAUTION: Check for obstructions in the
sensors, like wet clothes, foot, etc.
CAUTION: Door will not open if drain
sensors detect water in the tub unless the
Emergency Door Open Button is also
pressed at the same time.
CAUTION
:
Make sure the door comes to a complete stop to properly seal the
tub. Failure to do so may result in leaks. Contact Tech Support.
Foot-End
Controls
CONSOLE CONTROLS
Mixing Valve
Reservoir Fill
Control Valve
Door Open
Button
Console
Controls
Tub Fill and
Shower
Spray
Shower Spray
Control Valve
Liquid Dispensing
Controls
Door Close
Button
Reservoir Water
Thermometer
Tub Water
Thermometer
Emergency Door
Open Button
In an EMERGENCY, Press
emergency Door Open Button
and Open Door Button to
open door. It Override the
drain water sensors.
