Entrée Bath Gen III
OPERATION MANUAL
01-27-2022
Page 16 of 18
450 East 32
nd
Street PO Box 1022 (68026)
Fremont NE 68025
800-798-5867 Office: 402-564-5867 FAX: 402-563-9102
www.mastercarebath.com
EMERGENCY OPEN/CLOSE DOOR PROCEDURES
In the event of a medical emergency
where it is
needed to open the door before the tub is totally
empty: hold Emergency Door Open Button and the
Door Open Button
at the same time
to open the door
.
It will overwrite the drain water sensors.
In the event there is a power failure
.
1.
Open the Electrical Service Access Door
2.
Press the Door Open Backup.
GFCI RESET PROCEDURES
All MasterCare bathing systems are equipped with
onboard GFCI’s making them easy to access for your
convenience. In the event a power surge trips the
GFCI, it can be accessed and reset using the following
procedures:
GFCI
(Ground Fault Circuit Interrupter) detects and
interrupts electric faults to insure safety to all
individuals
Reset Button
: trips and shuts down all power should
a power surge, outage,faulty outlet, lightening etc
have any affect on the tub power system. And will
then be pushed to restore power after a qualified
individual deems it safe.
Test Button:
insures the CGFI is working properly by
allowing clear access for testing.
In the event of a power failure, GFCI will need to be
reset to resume operations.
Open Door Button
Emergency
Open Door Button
GFCI
Located at the
Service End
under the
Service Door