Master MORFEUS MAS-HG12, Assembly Instructions Manual

Page: 58 / 79

58
EN
CABLE ASSEMBLY (A)
1.
CONNECT THE CABLE WITH ONE
BALL (SHORT) (13)
Take the end with no ball of the cable up
pulley 1, under and round pulley 2 on
floating pulley block a (AF), up and round
pulley 4, under and round pulley 5 on
floating pulley block b (AG), up pulley 7&6
(on side cross beam), down and secure cable
to selector shaft (AS) with hook (10), chain
(9) and bolt M10*35 + lock nut (37).
2. CONNECT THE CABLE WITH NO
BALL (SHORT) (11)
Take one end of the cable up pulley 8 on
floating pulley block a (AF), under pulley 9
on pulley block (V), hook the end of the
cable over the right arm exercise frame (U).
Then thread the other end of the cable under
pulley 10 on pulley block (V), hook the end
of the cable over the left arm exercise frame
(T).