Master MORFEUS MAS-HG12, Assembly Instructions Manual

Page: 59 / 79

59
EN
CABLE ASSEMBLY (B)
3. CONNECT THE CABLE WITH ONE
BALL (LONGEST) (14)
Take the end with no ball of the cable up
pulley 11 (you should demount pulleys first),
and round pulley 12, up and round pulley 13,
under and round pulley 14, up and round
pulley 3, under and round pulley 15, up and
round pulley 16 on floating pulley block b
(AG), under and round pulley 18 on main
base, up and round pulley 19 on top cross
beam, under and round pulley 20 on floating
pulley block b (AG), up and round pulley 21,
secure the end to height adjustment (M)
with bolt M10*45 + two w lock nut
(26).
4. CONNECT THE CABLE WITH ONE
AND HALF BALL (15)
Take the end with half ball of the cable
under pulley 23 (you should demount
pulleys first), under pulley 24 on main
vertical beam (G), through the hole on pulley
block support (B), under and round pulley 17
on main base (A), up and round pulley 25 on
floating pulley block (AG), under and round
pulley 26 on guide upright (J), up and round
pulley 22.