Master MORFEUS MAS-HG12, Assembly Instructions Manual

Page: 54 / 79

54
EN
50 BOLT M10×45 1
51 SPEED BALL FIXER 1
52 BOLT M5×30 + NUT 4
53 ANKLE CUFF 1
ASSEMBLY INSTRUCTIONS (A)
1. Attach joint guide upright (J) and main base (A) to back base (F) with bolt M10*75 + washers + nut
(32).
2. Attach pulley block (V) to pulley block support (B) with bolt M10*130 + w nut (35).
3. Attach pulley block support (B) to main base (A) with bolt M10*70 + w nut (30).
4. Attach front base (D) to main base (A) with bolt M10*65 + w nut (29).
5. Insert joint tube (AC) to footplate (E) and front base (D).
6. Attach side base (AJ) and joint plate (AI) to main base (A) with bolt M10*75 + w nut (32).
7. Insert guide rod (H) to side base (AJ). Attach them with bolt M10*65 + w nut (29).
8. Slide rubber donut (8) over the guide rod (H). Slide weight plates (41) over guide rods (H).
9. Insert the selector shaft (AS) to weight plates (41). Attach plastic circle (22) to selector shaft (AS).
Slide top plate (42) over the guide rods (H).