EN
STEP 4 Connecting Arm Assembly
4.
Connect the Swing Arm (L) (15) to the left Lower Handle Bar and connect the
Swing Arm (R) (16) to the right Lower Handle Bar, and secure them with 6pcs of
5/16" ×1-3/4" Hex Head Bolts(76),4pcs of 5/16" × 23m/m × 1.5T Curved
Washers(113) and 6pcs of 5/16" × 7T Nyloc Nuts (91) by using 12m/m
Wrench(116) 13.14m/m Wrench(115).
5.
Put the Front Handle Bar Cover (L) (69) and the Rear Handle Bar Cover (L) (69~1)
together on the left Handle Bar and secure with 3pcs of Ø3.5 × 12m/m Sheet
Metal Screws(87) by using Combination M5 Allen Wrench & Phillips Head Screw
Driver(118). Repeat the same procedure for the right side.
6.
Connect the Console Mast Cover (L)(42) and the Console Mast Cover (R)(43)
together on the Console Mast and secure with 2pcs of Ø3.5 × 12L_Sheet Metal
Screw(87) by using Combination M5 Allen Wrench & Phillips Head Screw
Driver(118).
Summary of Contents for E65-ERGOMETER
