Installation & Operation Manual | HORIZON3D
©
MASTERIMAGE 3D, Inc.
24
Upper Vertical Alignment screw
Upper Horizontal Alignment screw
Upper Half Image Alignment
To achieve the best 3D display, the Optical Head must be installed properly and aligned optimally.
Tools Required: 2mm or 5/64” hex key wrench (Type: Small Right Angle)
3. Load the standard cross-pattern image from the projector.
4. Align the Upper image lines by turning the upper horizontal alignment screw.
(Clockwise: LEFT, Counter-Clockwise: RIGHT)
5. Align the Upper image lines by turning the upper vertical alignment screw.
(Clockwise: DOWN, Counter-Clockwise: UP)
6. Check if the Upper Half Image is aligned properly as below.
RIGHT
UP
DOWN
LEFT
Before alignment of Upper Half image
After alignment of Upper Half image
