Installation & Operation Manual | HORIZON3D
©
MASTERIMAGE 3D, Inc.
16
6. System Setup
6.1.
Initial System Assembly
6.1.1. Attach Optical Head to Tilt Angle Stage
Screw:M8x1.25x22L
Two Guide Pins
1.
Before attaching the Optical Head Assembly,
observe the two guide pins of Tilt Angle Stage
on Lift Column Actuator.
2.
Lift the Optical Head carefully into position.
3.
Attach the Optical Head Assembly onto Tilt
Angle Stage while aligning with the two guide
pins.
4.
Once located correctly secure with two hex
screws (M8x1.25x22L) provided.
