Page 13
KNOW YOUR SLIDING COMPOUND
MITER SAW
The safe use of this saw requires an
understanding of the information on the
tool and in this Operator’s Manual, as well
as knowledge of the project you are
attempting. Before use of this saw,
familiarize yourself with all of the operating
features and safety rules.
10 INCH BLADE
Your compound miter saw is designed to
be used ONLY with a 10 inch blade with
5/8 inch arbor.
Equipped with a 10 inch, 48 tooth, and
general purpose blade.
15 AMP MOTOR
This saw has a powerful 15 AMP motor
with sufficient power to handle tough
cutting jobs.
BEVEL-LOCK LEVER
To lock the saw at desired bevel angles.
CARRYING HANDLES
For convenience when carrying or
transporting the miter saw from one place
to another, carrying handles are located on
the top of the saw arm and the end of the
slide bar.
ELECTRIC BRAKE
The electric brake quickly stops blade
rotation after the On/Off trigger is released.
LED WORK LIGHT
LED work light shines on the work area for
improved visibility.
LASER
Laser projects a laser cutting line on the
work area for improved cutting accuracy.
MITER-LOCK HANDLE
The miter-lock handle securely locks the
miter table at the desired miter angle.
MITER-LATCH BUTTON
When pushing the miter latch button down,
it will release the miter table from pre-set
index points.
POSITIVE STOPS ON MITER TABLE
Positive stops at right and left 0°, 15°,
22.5°, 31.6°, and 45°.
LOWER BLADE GUARD
The lower blade guard is made of shock-
resistant, translucent plastic that provides
protection from each side of the blade. It
retracts over the upper blade guard as the
saw is lowered into the work piece.
SPINDLE-LOCK BUTTON
The spindle-lock button locks the spindle
while installing, changing, or removing
blade.
MULTI-SLIDE BAR
When unlocked, the saw arm will glide
forward and backward the length of the
multi-slide bar for cutting various work-
piece width.
SLIDE-LOCK KNOB
The slide-lock knob locks and unlocks the
sliding bars of this tool.
UPPER SLIDING FENCE
Upper fences adjustable for added
precision.
WORK PIECE CLAMP
The work piece clamp is mounted on the
left or right side of the base behind the
fence to securely clamp the work piece.
DEPTH STOP ADJUSTMENT BOLT
The depth stop adjustment is a feature
used when cutting grooves in the work
piece. The depth adjustment is used to
limit the blade depth.
SPECIFICATIONS AND FEATURES
