62
Step 2
- Connect to AP network Click "Go to connect" and find the right "AP_XXXXX" network (XXXXX
refers to logger SN).If the password is required, you can find the password on the logger
body. Go back to SOLARMAN Smart APP, after connecting to AP network.
Step 3
- Auto Configuration
Please wait for a while to complete the configuration. Then system will switch to the following
page. Click "Done" to check plant data. (Usually, the data will be updated in 10 mins).
If configuration failure occurs, please check the following reason and try it again.
1. Make sure WLAN is ON.
2. Make sure WIFI is normal.
3. Make sure wireless router does not implement the white-black list.
4. Remove the special characters in Wi-Fi network.
5. Shorten the distance between the phone and device.
6. Try to connect to other Wi-Fi.
User Manual
63
8 Alarm Code and Error Code
8.1 Alarm Code
Codes
English description
Grid Volt Low
Grid Volt High
Grid Frequency Low
Grid Frequency High
Solar Loss
Bat Loss
Bat Under Volt
Bat Volt Low
Bat Volt High
Over Load
GFCI Over
LN Reverse
Fan Fault
BAT Power Down
BMS Discharge Over Current
BMS charge Over Current
BMS Over Volt
BMS Over Temp
BMS Discharge Low Temp
BMS Volt Imbalance
BMS Communicate Fault
BMS Under Volt
BMS Chg Temp Low
BMS Severe Over Volt
BMS Severe Over Temp
BMS Updating
BMS Program Version Err
BMS Program Update Fail
CT Reverse
Grid Volt Lock Fail
PV off
System Reset
User Manual
W00
W01
W02
W03
W04
W05
W06
W07
W08
W09
W10
W11
W12
W13
W14
W15
W16
W17
W18
W19
W20
W21
W22
W23
W24
W25
W26
W27
W28
W29
W30
W31
