17
3.5.2. Einstellung der Funktionstasten
Bei der Wahl der Funktionsdatenübertragung
kann mit der Taste
M2
zwischen parallel
P
und seriell
S
gewählt werden. Bestätigen Sie
Ihre Wahl anschließend mit
M3
wenn Sie nicht
auch noch die F-Tasten konfigurieren möchten.
Üblicherweise werden alle DCC-Decoder im „P“-
Modus gestartet. Einige ältere LGB-Soundloks
benötigen die spezielle „serielle Pulskette“.
Sie haben die Möglichkeit die Funktionen 1-16
auf Moment- oder Dauerbetrieb zu konfigurie
-
ren. Um die Tasten 9-16 auszuwählen drücken
Sie einmal die
F-Taste
. Sind die Zahlen 1-16 im
Display nicht invers abgebildet, so arbeiten die
Tasten wie üblich (1 x Drücken entspricht 1 x
3.5.2. Function Key Settings
When configuring the function key settings you
may select from parallel
P
and serial
S
with
M2
. Confirm your selection with
M3
unless you
would like configure the single function keys
as well. Usually DCC decoders are operated in
parallel mode. Older LGB sound locomotives
may only support the serial function mode.
You may also select momentary or permanent
function mode for F1 to F16. To select F9 to
F16 press the
F-key
once. When the numbers
are displayed regularly (not inverted) func
-
tion keys will operated in momentary function
mode (pressing once will activate or deacti
-
Summary of Contents for DiMAX Navigator
Page 1: ...DiMAX Navigator ...