40
8.9
Funkbetrieb konfigurieren
•
Frequenzband:
Die folgenden Frequenzen können eingestellt
werden. Es funktioniert immer nur die Frequenz
des jeweils eingebauten Senders:
•
EU
- für Europa (433MHz)
(siehe auch Kapitel
Kanalwahl
)
•
US
- für Nordamerika (915MHz)
(siehe auch Kapitel
Kanalwahl
)
•
2.4
- Weltweit / International (2.4GHz)
(siehe auch Kapitel
LogIn 2.4GHz
)
•
Kanalwahl
(für EU / US Sendemodule):
Vier Kanäle stehen zur Verfügung. Im Auslie-
ferungszustand ist Kanal 1 als Standard vor
-
gegeben. Nach Kanalwechsel schaltet sich der
Navigator automatisch aus und muss manuell
eingeschaltet werden. In manchen Fällen kann
ein Kanalwechsel die Reichweite verbessern.
Beachten Sie bei einem Kanalwechsel auch den
Empfänger entsprechend zu ändern! Lesen Sie
hierzu die Bedienungsanleitung des Empfängers.
•
Funk-Abschaltzeit:
8.9
R/C mode configuration
•
Frequency band:
The following frequencies may be selected. Only
the frequency band of the fitted transmitter will
work:
•
EU
- for Europe (433MHz)
(also see chapter
Radio Channel Selection
)
•
US
- for US / North America (915MHz)
(also see chapter
Radio Channel Selection
)
•
2.4
- world wide / international (2.4GHz)
(also see chapter
Radio Connection 2.4GHz
)
• Channel Selection EU / US Modules: Four R/C
channels are available. Channel 1 is preset
as factory default. After selecting a new radio
channel the Navigator will automatically shut
down and needs to be started again manually.
In some cases selecting a new radio channel
may enhance the radio range. Please make sure
to change the Receivers radio channel as well,
when selecting a new channel for the Navigator.
Please refer to the manual of the Receiver.
•
Radio shut off time:
Summary of Contents for DiMAX Navigator
Page 1: ...DiMAX Navigator ...