24
4.6 Rückmeldeanzeige
Mit der aktivierten Rückmeldeanzeige (über Spe
-
zialmodus B3) ist es möglich, die ausgelösten
Gleiskontakte der Rückmeldemodule im Naviga
-
tor anzeigen zu lassen. In der 2. Funktionsebene
unter Schaltbefehl werden die Kontaktnummern
in der unteren Zeile dargestellt. Vorne sehen
sie die umgerechnete Kontaktnummer, wie sie
bei der PC-Steuerung verarbeitet wird. Hinten
steht die programmierte Kontaktnummer.
5. Loktraktion
Bei einer Loktraktion werden mehrere Loks
zu einem Zug zusammengestellt. Das kennt
man beispielsweise von langen Güterzü
-
gen aus den USA.
Um eine Loktraktion zu
nutzen, muss diese erst definiert werden.
Als Standard wird die Traktion Nr. 1 geladen.
Hier können Sie mit
M2
die zuvor ein
-
gestellten Traktionen durchblättern.
Haben Sie die gewünschte Traktion,
wählen Sie diese mit
M3
aus.
Nun werden im Traktionsmodus anstelle
des Loksymboles die Adressen der bis zu 4
Traktionsloks angezeigt. Die Steuerung der
Traktion ist mit der Loksteuerung vergleich
-
bar. Ist in der ausgewählten Traktion eine
falsch oder nicht konfigurierte Lokadresse
4.6 Feedback display
When special mode 3 is activated, the feedback
data of triggered track contacts connected to
feedback modules are shown in the display
of the Navigator. When the switch command
function is selected for the secondary func-
tion display the feedback details are shown
below the switch address. The first four
digits show the triggered contact address
as it is used for PC control, the last 5 digits
show the programmed contact number.
5. Consist
A consist is the combination of multiple
locos in one train. The known example of
long freight trains in the US.
In order to use
a consist, it has to be configured first.
Consist no. 1 is the standard setting to be acti-
vated when selecting the consist mode. Use the
M2
key to select one of the preconfigured con
-
sists. Confirm the desired consist with the
M3
key. Instead of the locomotive picture the con
-
figured loco addresses of the chosen consist are
shown in the display. The consist is operated
similar to a single loco, with the dial knob and
the keyboard. If a configured loco of the consist
does not exist it is shown with an
X
behind the
loco address. This also applies to active locos
Summary of Contents for DiMAX Navigator
Page 1: ...DiMAX Navigator ...