background image

          

- 31

MPL 206 A - MPL 226 A

GB

GB

9 GUARANTEE AND RESPONSIBILITY

9.1 G

UARANTEE

• The 

ma

s

e

 generators and all their components are guaranteed free of defects and are covered by the guarantee

for a period of  2  year from the date of installation.

• Not covered by the guarantee are: failed observance of the installation regulations, damage caused by natural

disasters, accidents, defects of the electrical system including the load to which the generator is connected,
negligence, improper use or abuse by the operator and damage caused by repairs carried out by unqualified
personnel.

• Repairs that cannot be carried out at the place of installation can be carried out at 

ma

s

e

 laboratories or at

authorised workshops. Transport expenses will be borne by the Customer.

• Under no circumstances does the Customer have the right to claim compensation for damages or side effects

caused by use of the machine in a manner not conform to what is described in this manual.

9.2 L

IMITS

 

OF

 

RESPONSIBILITY

ma

s

e

 GENERATORS S.p.A is responsible for anything regarding the safety, reliability and performance of the

Generator on the condition that:

• The generator is used by persons trained through the use and maintenance manual.

• The installation is carried out according to 

ma

s

e

 instructions.

• The service procedures are carried out exclusively by 

ma

s

e

 specialised technical personnel.

• The electrical system and the loads to which the generator is connected is in conformity with the applicable CEI

regulations.

• The Generator is installed and used in accordance with the installations provided in this manual.

• Use original spare parts specific to each model.

• Use suitable fuel.

10 DISPOSAL

10.1 D

ISPOSAL

 

OF

 

THE

 

WASTE

 

MATERIALS

 

DERIVING

 

FROM

 

MAINTENANCE

 

AND

 

SCRAPPING

• The packaging used for transport is biodegradable and thus easy to dispose of by companies authorised for paper

collection.

• The electrical components must be taken to companies authorised for the collection of electronic material.
• All the painted metal parts must be taken to companies authorised for the collection of metals.

Please note that the system and its components contain materials that, if dispersed in the environment, may

cause significant ecological damage.

The following materials must be delivered to specific collection centres authorised for their disposal:
-  Starter battery
- Spent lubrication oils;
- Mixtures of water and anti-freeze;
- Filters;
- Auxiliary cleaning material (e.g.: rags smeared or soaked with fuel and/or chemical cleaning products).

• Any other material not listed above must be taken to companies authorised for the collection of industrial waste.

Summary of Contents for MPL 206 A

































Reviews: