Shiver
DC
16
A
17
18
FIG. 10
Fit the slider protector
(A)
onto the slider
and remove the oil seal
(16)
with the help
of a large slot screwdriver.
IMPORTANT:
when removing the oil seal,
make sure not to damage slider inner seat.
Once removed the oil seals should not be
used again.
FIG. 11
Remove bush washer
(17)
from the slider.
FIG. 12
To remove the guide bushing
(19)
and the
spacer
(20)
, beat powerfully the slider
edge
(18)
on a wooden surface. Perform
this operation with extreme care and try to
keep the slider perpendicular to the wooden
surface. Use a bush puller in case of need
and do not scratch slider inner surface.
Make all necessary changes.
