Shiver
DC
Nm
11
3
3
36-39
3
3
38
37-25
36-39
Nm
11
Nm
11
• Now finally tighten the screws
(3)
on the
upper crown
(36)
or
(39)
to the speci-
fied torque.
• Position lower handlebar support
(37)
or
(25)
onto the upper crown
(36)
or
(39)
;
holes must be aligned.
• Secure the above two parts together by
means of the screws
(3)
.
Tighten the
screws to the specified torque.
• Fit the handlebar: center in handlebar
support and lock by means of upper bolt
(38)
and the screws
(3)
; tighten the
screws to the specified torque, working
crossways.
DISC BRAKE SYSTEM ASSEMBLY
Assembling the brake caliper onto the wheel
shaft pinch bolts is a very delicate operation
that should be carried out with extreme
care.
Improper assembly might overstress the
caliper supports which might break.
This system should be installed by special-
ized technicians in a position to fully under-
stand and properly follow the instructions
given by the manufacturer.
