Shiver
DC
26
A
A
D
B
36-39
E
D
C
3
3
Nm
11
• Distance
“D”
between lower Crown
and tyre edge (when inflated) should not
be lower than
193 mm
(total travel
+ 3
mm
).
WARNING:
if lower Crown is im-
properly matched with sliders, it may
touch the tyre and cause severe injuries to
the rider.
• When fitting the slider onto the lower
Crown, step
(A)
corresponding to outer
diameter variation must be as high as or
be higher than the most inner contact
point
(B)
between lower Crown
(26)
and sliders.
• Assemble the fork to the frame complete
with headset.
• Fit the upper crown
(36)
and
(39)
into
the upper sliders and the steering tube.
• Ensure that upper surface
(C)
is as high
as or higher than the most inner contact
point
(D)
between upper crown
(36)
and
(39)
and sliders.
• If fork legs overprotrude, fit some spac-
ers
(E)
to the plate close to the steering
tube.
• If the lower Crown position with respect
to the sliders has been changed for any
reason, adjust the original distance
(D)
.
• Tighten the retaining screws
(3)
holding
the sliders to the lower Crown to the
specified torque.
WARNING:
do not overtighten the
screws
(3)
as this may distort the
stanchions and weaken the whole structure.
