MARUTI SUZUKI TOUR V, Manual

Page: 105 / 141

8-14
INSPECTION AND MAINTENANCE
76MH1-74E
09-60B307A
NOTE:
If your engine is equipped with the high-
tension cord type ignition wiring and you
experience some firing problem of spark
plugs, such as, hard engine-starting, mis-
fire etc., the cause may be located not only
on spark plugs but also on deteriorated
ignition wirings (generally, used for more
than 80,000 km or five years). If spark plug
replacement does not solve the problem,
have the ignition wiring and other ignition
system inspected by your Maruti Suzuki
authorised workshop.
BRAKES
09-77A026A
Brake Fluid
Check the brake fluid level by looking at
the reservoir in the engine compartment.
Check that the fluid level is between the
“MAX” and “MIN” lines. If the brake fluid
level is near the “MIN” line, fill it up to the
“MAX” line with MARUTI GENUINE brake
fluid.
78MM08002
CAUTION
When replacing spark plugs, you
should use the brand and type speci-
fied for your vehicle. For the speci-
fied plugs, refer to the “SPECIFICA-
TIONS” section at the end of this
book.
0.8 ~ 0.9 mm
EXAMPLE
WARNING
Failure to follow the guidelines below
can result in personal injury or seri-
ous damage to the brake system.
EXAMPLE
MAX
MIN
EXAMPLE
WARNING
• If the brake fluid in the reservoir
drops below a certain level, the
brake warning light on the instru-
ment cluster will come on (the
engine must be running with the
parking brake fully disengaged).
Should the light come on, immedi-
ately ask your Maruti Suzuki autho-
rised workshop to inspect the
brake system.
• A rapid fluid loss indicates a leak in
the brake system which should be
inspected by your MARUTI SUZUKI
dealer immediately.
• Brake fluid can harm your eyes and
damage painted surfaces. Use cau-
tion when refilling the reservoir.
• Do not use any fluid other than
MARUTI GENUINE brake fluid. Do
not use reclaimed fluid or fluid that
has been stored in old or open con-
tainers. It is essential that foreign
particles and other liquids are kept
out of the brake fluid reservoir.