MARUTI SUZUKI TOUR V Manual Download Page 48

Page: 48 / 141

3-3

INSTRUMENT PANEL

76MH1-74E

04-50G052A

Charging Light

This light comes on when the ignition

switch is turned on, and goes out when the

engine is started. The light will come on

and re-main on if the battery is not being

charged. If the light comes on when the

engine is running, the charging system

should be inspected immediately by your

Maruti Suzuki authorised workshop.

04-70G037A

“Malfunction Indicator” Light

Your vehicle has a computer-controlled

emission control system. A malfunction

indicator light is provided on the instrument

panel to indicate when it is necessary to

have the emission control system serviced.

The malfunction indicator light comes on

when the ignition switch is turned to “ON”

or "START" and goes out when the engine

is started. If the malfunction indicator light

comes on when the engine is running,

there is a problem with the emission con-

trol system. Bring the vehicle to your

Maruti Suzuki authorised workshop to

have the problem corrected.

04-50G055A

Turn Signal Indicators

When you turn on the left or right turn sig-

nals, the corresponding green arrow on the

instrument panel will flash along with the

respective turn signal lights. When you

turn on the hazard warning switch, both

arrows will flash along with all of the turn

signal lights.

NOTE:

If any abnormality of the turn signals is

observed, such as fast blinking, there may

be malfunction in the turn signal system.

Ask your Maruti Suzuki authorized work-

shop to inspect the system.

04-50G056A

Main Beam (High Beam) Indicator Light

This indicator comes on when headlight

main beams (high beams) are turned on.

CAUTION

• If you operate the engine with this

light on, severe engine damage can

result.

• Do not rely on the Oil Pressure

Light to indicate the need to add

oil. Be sure to periodically check

the engine oil level.

CAUTION

Continuing to drive the vehicle when

the malfunction indicator light is on

can cause permanent damage to the

vehicle’s emission control system,

and can affect fuel economy and

driveability.

Summary of Contents for TOUR V














































































































































Search results

Summary of Contents for TOUR V

Reviews:

Related manuals for TOUR V

Brands by name

Popular brands

MARUTI SUZUKI TOUR V, Manual

Search results

Summary of Contents for TOUR V

Reviews:

Related manuals for TOUR V

Brands by name

Popular brands