MARUTI SUZUKI TOUR V Manual Download Page 109

Page: 109 / 141

8-18

INSPECTION AND MAINTENANCE

76MH1-74E

09-65D112A

Tyre Rotation

To avoid uneven wear of your tyres and to

prolong their life, rotate the tyres as illus-

trated. Tyres should be rotated as men-

tioned in periodic maintenance schedule.

After rotation, adjust front and rear tyre

pressures to the specification listed on

your vehicle’s Tyre Inflation Pressure

Label.

Wheel Balancing

If the vehicle vibrates abnormally on

smooth road, have the wheel balanced at

Maruti Suzuki authorised workshop.

Wheel Alignment

In case of abnormal tyre wear or pulling

towards one side, have the wheel aligned

Maruti Suzuki authorised workshop.

Tubeless Tyres

The vehicle is equipped with Tubeless

Tyres. In tubeless tyre, a thin layer of butyl

rubber is used for lining the inside of the

tubeless tyre. This layer is to prevent air

loss and fulfilling the purpose of tube. The

air pressure is maintained by the sealing

between tyre bead and wheel rim. Tube-

less tyres are having advantage of slow air

loss and preventing sudden deflation while

driving.

Care and maintenance tips for tubeless

tyres

1) Always maintain recommended infla-

tion pressure. Driving continously at low

inflation pressure can lead to tyre dam-

age.

2) In case any leakage is found, check for

any nail penetration/valve core damage

or rim bent. Damaged wheel must not

be used.

3) In case tyre has run at low pressue, it

must be inspected for any defect.

4) Whenver new tyre is fitted, replace the

valve.

5) If continous high speed driving is

required, increase tyres pressure by 5

psi over recommended inflation pres-

sure.

6) Never run the tyre beyond TWI (Tread

wear indicator). The tyre is recom-

mended to be replaced when the

remaining tread has worn to this point.

The indicators are spaced across the

tread around the tyre marked by a tri-

agular symbol (TWI).

7) Always prefer tubeless tyre mounting

machine. In case of manual mounting-

tyre/wheel rim damage may occur.

8) In case of any problem, please get in

touch with Maruti Suzuki authorised

workshop.

09-77A066A

CAUTION

Replacing the original tyres with

tyres of a different size may result in

false speedometer or odometer read-

ings. Check with your Maruti Suzuki

authorised workshop before pur-

chasing replacement tyres that differ

in size from the original tyres.

EXAMPLE

Summary of Contents for TOUR V














































































































































Search results

Summary of Contents for TOUR V

Reviews:

Related manuals for TOUR V

Brands by name

Popular brands

MARUTI SUZUKI TOUR V, Manual

Search results

Summary of Contents for TOUR V

Reviews:

Related manuals for TOUR V

Brands by name

Popular brands