MARUTI SUZUKI TOUR V, Manual

Page: 111 / 141

8-20
INSPECTION AND MAINTENANCE
76MH1-74E
7) Lower the jack and fully tighten the nuts
to the specified torque in a crisscross
fashion with a wrench as shown in the
illustration.
BATTERY
The level of the battery solution must be
kept between the "MAX" and the "MIN"
level lines at all times. If the level is found
to be below the “MIN” level line, add dis-
tilled water to the “MAX” level line.
09-60A238A
54G118
You should periodically check the battery,
battery terminals, and battery hold-down
bracket for corrosion. Remove corrosion
using a stiff brush and ammonia mixed
with water, or baking soda mixed with
water. After removing corrosion, rinse with
clean water.
WARNING
Use MARUTI SUZUKI genuine wheel
nuts and tighten them to the speci-
fied torque as soon as possible after
changing wheels. Incorrect wheel
nuts or improperly tightened wheel
nuts may come loose or fall off,
which can result in an accident. If
you do not have a torque wrench,
have the wheel nut torque checked
by a Maruti Suzuki authorised work-
shop.
WARNING
Batteries produce flammable hydro-
gen gas. Keep flames and sparks
away from the battery or an explo-
sion may occur. Never smoke when
working in the vicinity of the battery.
WARNING
When checking or servicing the bat-
tery, disconnect the negative cable.
Be careful not to cause a short circuit
by allowing metal objects to contact
the battery posts and the vehicle at
the same time.
WARNING
To avoid harm to yourself or damage
to your vehicle or battery, follow the
jump starting instructions in the
"EMERGENCY SERVICE" section of
this manual if it is necessary to jump
start your vehicle.
MIN
MAX
Type 1
EXAMPLE
Type 2
EXAMPLE