MARUTI SUZUKI TOUR V, Manual

Page: 55 / 141

3-10
INSTRUMENT PANEL
76MH1-74E
higher blower speed position increases
heating efficiency.
Quick Heating (Using recirculated air)
The control settings are the same as for
normal heating except you select
“RECIRCU-LATED AIR”. If you use this
heating method for an extended period of
time, the air in the vehicle may become
contaminated and the windows can
become misty. Therefore, use this method
only for quick heating and change to the
normal heating method as soon as possi-
ble.
Cool Face/Warm Feet
Select “BI-LEVEL”, and “FRESH AIR”, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully COLD position or fully HOT posi-
tion, the air that comes out of the center
and side outlets will be cooler than the air
that comes out of the floor outlets.
Defrosting/Warm Feet
Select “HEAT & DEMIST”, and “FRESH
AIR”, the temperature selector to the
desired temperature position, and the
blower speed selector to HIGH. When the
windscreen has become clear, set the
blower speed selector to the desired
blower speed position.
Defrosting
Select “DEMIST”, and “FRESH AIR”, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to HIGH. Setting the temperature
selector to a higher temperature position
increases demisting efficiency. When the
windscreen has become clear, set the
blower speed selector to the desired
blower speed position.
AIR CONDITIONING SYSTEM
(if equipped)
04-81A028A
If your vehicle is equipped with air condi-
tioner, it has an A/C switch located on the
heater control panel. The air conditioning
system can be used to provide cooling and
dehumidifying, as described below. To turn
on the air conditioning system, push in the
A/C switch and set the blower speed
selector to a position other than "OFF". An
indicator light will come on when the air
conditioning system is on. To turn off the
air conditioning system, push the A/C
switch again.
During operation of the air conditioner, you
may notice slight changes in engine
speed. These changes are normal, the
system is designed so that the compressor
turns on or off to maintain the desired tem-
perature.
HEATER & DEMIST
VENTILATION
DEMIST
RECIRCULATED AIR
FRESH AIR
EXAMPLE