![background image](http://html1.mh-extra.com/html/martin/lc-plus/lc-plus_installation-and-safety-manual_1732827006.webp)
6
LC Plus user manual
Connections overview
A - Ethernet port 1
Used for bi-directional P3 system communication.
Accepts an Amphenol IP67-rated Ethernet cable
connector (or a standard Ethernet connector for
indoor use only).
Warning! All connectors that are not in use
must be sealed at all times with the caps
provided.
B - Ethernet port 2
Used for bi-directional P3 system communication.
Accepts an Amphenol IP67-rated Ethernet cable
connector (or a standard Ethernet connector for
indoor use only).
Warning! All connectors that are not in use
must be sealed at all times with the caps
provided.
C - Control panel and LED display
See “Using the control panel and control panel
display” on page 19 for details.
D - Power input connector
Used to supply power to the panel. Accepts an
Amphenol IP67- rated power input (female) cable
connector.
E - Power throughput (output) connector
Used to relay power to another LC Plus panel.
Accepts an Amphenol IP67-rated power output
(male) cable connector. The voltage and
frequency available at this connector are the
same as those applied at the power input
connector
D
.
Warning! A maximum of FIVE LC Plus 2140
panels in total or TEN LC Plus 1140 panels in
total may be connected to power in one chain
that draws power through the first panel’s
power input connector. All connectors that
are not in use must be sealed at all times with
the caps provided.
Figure 1: Connections