![background image](http://html1.mh-extra.com/html/martin/jem-k1-hazer/jem-k1-hazer_user-manual_1732684018.webp)
18 Basic
service
Basic service
Before servicing the JEM K1 Hazer™, read and observe all the precautions listed
in “Safety information” on page 3. Any service not described in this section must
be carried out by a Martin service technician.
C l e a n i n g
Excessive dust, haze fluid, and dirt build-up will degrade performance and
cause overheating and damage to the machine that is not covered by the
product warranty. To maintain adequate cooling, dust must be cleaned from the
outer casing and air vents of the machine periodically.
Isolate the machine from power and allow to cool completely before cleaning.
The haze output nozzle remains hot for up to 10 hours after use.
•
Remove dust from the air vents with a soft brush, cotton swab, vacuum,
or compressed air.
•
Clean haze fluid residues from the output of the machine.
•
Clean the outer casing with a damp cloth only.
E r r o r m e s s a g e s
If the display shows
, the machine has detected an internal fault. Switch off
the machine and contact Martin Service.
F u s e r e p l a c e m e n t
The main fuse for the JEM K1 Hazer™ is in a fuse holder located adjacent to the
power inlet. To replace the fuse, disconnect the power cord from the supply,
unscrew the cap of the fuse holder and pull out the fuse. Remove the spent fuse
and replace with one of exactly the same size and rating. The fuse type is
indicated on the serial number label as well as below. Contact Martin Service if
the fuse blows repeatedly.
Summary of Contents for JEM K1 Hazer
Page 1: ...K1 HAZERTM user manual P N 35010031 G...
Page 23: ...Notes 23 Notes...