20 Status
messages
Status messages
message reason
The heaters are Off, the unit is shut down.
The unit is heating up to operating temperature.
The heater is at operating temperature, but Haze is not turned
on.
The heater is at operating temperature and the unit is under
DMX control.
(Number may be 01 to 90): Machine is in timer mode,
counting down the run period.
(Number may be 01 to 90): Machine is in timer mode,
counting down the off period.
(Number may be 90 to 00): The machine is carrying out its
shutdown sequence.
The machine has detected an error with its calibration
settings and will not operate. Call Martin Service.
The air pump is not working. This indicates a fault. Turn the
machine off and call Martin Service.
The fluid pump is not working. This indicates a fault. Turn the
machine off and call Martin Service.
The heater is at too high a temperature. This indicates a fault.
Turn the machine off and call Martin Service.
(on start-up) The machine’s run time has passed its
recommended service interval. The machine is safe to use
but should be serviced as soon as is convenient.
(on start-up) The internal battery is low and the last shutdown
did not complete. If this message displays on every start-up,
call Martin Service to obtain a replacement battery.
Summary of Contents for JEM K1 Hazer
Page 1: ...K1 HAZERTM user manual P N 35010031 G...
Page 23: ...Notes 23 Notes...