Control
settings
13
S e t t i n g t h e D M X b a s e a d d r e s s
Use the Previous / Next buttons to select the
option.
Use the Up/Down buttons to set the DMX base address from
to
. If
you hold down the button the address will count up or down, getting faster the
longer you hold it.
Press the Enter button to store the address setting.
The machine will automatically respond to a DMX controller whenever it is
connected.
S e t t i n g t h e m a s t e r - s l a v e l i n k m o d e
It is possible to control several machines from one digital remote. The machine
with the remote plugged into it becomes the Master. The other machines are
Slaves. The machines are interconnected with DMX cabling.
Use the Previous / Next buttons to select the
option.
Use the Up/Down buttons to select
or
.
Press the Enter button to store the link setting.
The machine should be set to
only if it is running as a master. If running
as a slave, stand-alone or DMX controlled it should be set to
.
A u x o p t i o n
This option is not currently used and has no effect on the machine.
P r i m i n g t h e m a c h i n e
If the machine runs out of fluid or you are priming a new machine, use the
PRIME function:
Use the Previous / Next buttons to select the
option.
Use the Up/Down buttons to change the option to
.
Press the Enter button to start the priming function.
The machine will pump until it detects fluid entering the block
To exit this menu if you decide not to activate the Prime function, select
and
press Enter.
If the machine is not up to operating temperature the Prime function will do
nothing.
Summary of Contents for JEM K1 Hazer
Page 1: ...K1 HAZERTM user manual P N 35010031 G...
Page 23: ...Notes 23 Notes...