Martin Exterior 600, User Manual

Page: 28 / 84

28 General operation
Fixture control methods
The Exterior 600 can be controlled:
• With DMX signals from a DMX control device such as a DMX recorder or
DMX controller. This is described in “Section 3. DMX control” on page 45.
• Using stand-alone programming. There are two ways of programming
and storing a show in the fixture itself:
a. From a personal computer, using the Martin MUM software
application, or
b. Via an MP-2 Uploader
Stand-Alone programming is described in “Section 2. Stand-Alone
operation” on page 31.
Color matching Exterior 200s and
600s
If you are running Exterior 200 and Exterior 600 fixtures together in the
same installation, colors will not match perfectly when the same CMY
values are used, because these fixture use different lamps.
Generally speaking, the relatively:
• Higher-powered lamps used in the Exterior 600 result in deeper colors in the
cold colors of the spectrum.
• Lower-powered lamp used in the Exterior 200 will give deeper colors in the
warm colors of the spectrum.
The following table gives some approximate values for color matching:
Color
Exterior 600
(with MSD 575 lamp) Exterior 200
(with CDM lamp)
White Magenta 25
Yellow 44 Open
White Open Cyan 74
Yellow Yellow 241
Magenta 16 Full yellow
Magenta Magenta 100
Yellow 68 Full magenta
Cyan Full cyan
Magenta 25
Yellow 44 Full cyan