Martin Exterior 600, User Manual

Page: 27 / 84

General operation 27
they are installed in sandy or dirty environments. Never try to modify the
light beam by covering the center of the front glass or sticking anything on
the front glass.
Exterior 600 barn doors accessories shape the beam by masking the edge
of the front glass. This solution is problem-free and is recommended if beam
shaping is required.
The LEDs and fixture operating
status
Two LEDs on the rear panel display the
fixture status. Normal operation is indicated
by two green LEDs. See Table 1 for other
status messages.
The LEDs flash off for a brief instant at
regular intervals to prevent false readings
when the light sensor samples the light level.
The three-digit version number ( major.minor.build ) of the installed firmware
is displayed by the LEDs on power up; the number of:
• Red flashes in LED 1 indicate the major number, followed by,
• Green flashes in LED 2 indicate the minor number, followed by,
• Red flashes in LED 2 indicate the build number (only used for beta
releases)
For example, if the firmware version is 1.3.0, LED 1 flashes red once and
LED 2 flashes green three times.
Appearance Message, LED 1 Message, LED 2
Steady green Effects OK Data OK.
Steady red - Invalid data/no data
Steady yellow Waiting for upload, or
upload in progress Waiting for upload, or
upload in progress
Flashing yellow Reset in progress Reset in progress
Flashing red & green Contact a service
technician
Off - No data detected
Table 1: LED status messages
LED 1 LED 2 SENSOR