Service
75
Installing software
1. Connect a PC running the Martin Software Uploader application to a
Martin DABS 1™ interface box (included in P/N 90758090) and from
there to the Luminaire’s DMX data input or to a suitable point on the
DMX link. Software will be uploaded to that Luminaire and all
Luminaires of the same type that are powered on and connected via
the DMX link.
2. Upload the Luminaire software as described in the Uploader
application’s help file or user documentation.
3. Disconnect the uploader hardware and reconnect the Luminaire to the
DMX link.
4. Cycle power off and on. Check that the Luminaire resets correctly and
behaves normally. If it does not, cycle power off and on again and
check that the Luminaire now resets correctly and behaves normally.
If the problem persists, contact Martin™ for assistance.