44
Martin Professional™ Exterior 50 & 100™ system user manual
Connecting a Splitter
Internal access to a Splitter
For internal access to a Splitter:
1. Check that the system is isolated from AC mains power and that
power cannot be reapplied during work on the system.
2. See Figure 20. Remove the two screws
A
from the top cover and lift
the cover off the Splitter housing for access to the terminals and fuse.
3. After you have finished connecting and testing the Splitter, check that
mating surfaces are clean and undamaged and reinstall the top cover
and screws
A
securely, making sure that you do not trap any wires
under the top cover. Note that, if the Splitter is required to be fully
waterproof, you will need to fill it with IP68 sealant (see ”Filling a
Splitter with IP68 sealant” on page 57).
Figure 20: Internal access to Splitter
A
A