56
Martin Professional™ Exterior 50 & 100™ system user manual
• Connect the data +ve (hot) black wire marked
3
with
no colored
ring
to the terminal marked
DMX+
.
• Connect the data -ve (cold) black wire marked
4
with the
yellow
ring
to the terminal marked
DMX-
.
4. Tighten the cable gland as described in ”Installing a cable in a cable
5. If you are going to connect another Luminaire to the Splitter, repeat the
above instructions for connecting Luminaires, installing the unused
luminaire (smaller diameter) cable gland on the luminaire cable and
connecting the wires in the luminaire cable to the unused luminaire
cable terminals.
If you have finished making connections to the Splitter, see Figure 30:
• Install the supplied DMX terminator in the unused DMX data
terminals as shown in Figure 23 so that it bridges the
DMX+
and
DMX+
terminals.
• Install the correct-sized blanking plug in any unused cable gland
(
see ”Installing a blanking plug in an unused cable gland” on page
24).
• If the Splitter needs to be fully waterproof, fill it with the sealing
compound available from Martin™ (see ”Filling a Splitter with IP68