Martin Professional MAC 250 Entour, User Manual

Page: 45 / 56

Error messages 45
E
RROR MESSAGES
Fisplay readout Appears if... What to do
 (=emory error)
...the 44QR1= memory cannot be
read.
D Contact service technician.

or
... there is no communication between
the control panel and motherboard.
This appears briefly when switching on
the fixture.
D Chec7 fuses.
D Chec7 cable between control panel
and motherboard.
D Reinstall software.
D Contact service technician.

(Color wheel timeKout)

(Rotating gobo timeKout)

(Pixed gobo timeKout)

(hobo indexing timeKout)
...the magneticKindexing circuit
malfunctions (e.g. sensor defective or
magnet missing).
D !fter the timeKout, the effect in YuesK
tion stops in a random position.
D Contact service technician.

...the software doesngt detect any
pulses from the light sensor for a
specific period of time.
D 4nsure that the light sensor cable is
mounted correctly on the Qd54 conK
nector. If it is, the light sensors may
be defective.

...the lamp cannot be struc7.
D Replace the lamp

....there is a short circuit and the lamp
is struc7 without a command.
D Contact service technician.

...the temperature in the base is too
high
D Chec7 that fans are clean and wor7K
ing. Clean fixture if necessary
D Chec7 that the ambient temperature
does not exceed 40O C (104O P)
D Contact service technician if the
problem persists.
 (head temperature cutoff)
...the temperature in the head is too
high
D Chec7 that fans are clean and wor7K
ing. Clean fixture if necessary
D Chec7 that the ambient temperature
does not exceed 40O C (104O P)
D Contact service technician if the
problem persists.

...if there is a pan error and the sensor
cannot find the pan index point
D !fter the timeKout, the fixture stops in
a random position.
D Contact service technician.

...if there is a tilt error and the sensor
cannot find the pan index point
D !fter the timeKout, the fixture stops in
a random position.
D Contact service technician.

...if there is a drive current error.
D Contact service technician.

...if there is a display programming
error.
D Contact service technician.
Table 7: Error messages