Martin Professional MAC 250 Entour, User Manual

Page: 24 / 56

24 MAC 250 Krypton/Entour
3. ]sing a flathead screwdriver, remove the two retaining plates (only one K at position ! K is illustrated
here) holding the prism module in place. Disconnect the cables (at positions mar7ed b) from the QCbs
on the prism module.
4. dift the prism module out of the fixture.
5. ]sing a Qhilips screwdriver, remove the halfKcircle shaped plate that holds the prism into place (as
indicated in this illustration).
6. Remove the rubber belt to free the prism and replace it with a compatible rotating prism (contact your
=artin dealer for a list of available prisms).
7. Replace the rubber drive belt over the rotating prism and screw the halfKcircle shaped plate into place.
The prism should be able to rotate freely.
8. Reinsert the prism module into the fixture, reattach the leads (these are numbered) to the QCbs, and
screw the retaining plates into place.
9. Replace the top cover using a flathead screwdriver to tighten the four YuarterKturn screws.
10. Connect the fixture to !C power.
A
K